The UMG 512-PRO is a class A certified power quality analyzer per IEC 61000-4-30. Power quality parameters such as harmonics up to the 63rd harmonic, flicker, short-term interruptions, etc., are me...
Fourier analysis 1st to 40th harmonic component for U, I, P (consumption/supply) and Q (inductive/capacitive)
Registering and storage of transients (>50 µs)
2 digital inputs
2 digital outputs
T...
The UMG 806 energy measurement device offers a cost-effective, high-performance solution for precise energy monitoring. Its compact design and Modbus RTU communication make it ideal for space-const...
TRM210 is a stand-alone PID controller (on-off control also available), which is available in two enclosures: for wall or for panel mounting. This controller has two inputs and two outputs on board...
The MSD200 data logger is designed for DIN rail mounting and has two RS485 interfaces. The device supports Modbus RTU and ASCII protocols. 64 channels for data querying and archiving are available....
The humidity and temperature transmitter PVT100 is intended to measure relative humidity, temperature, or dew point while ensuring high accuracy and stability. The dust-tight and water-resistant IP...
The humidity and temperature transmitter PVT10 designed for indoor installation is intended to measure relative humidity, temperature, or dew point while ensuring high accuracy and stability. Compa...
PD121 features a flush diaphragm making the device highly suitable for measurements in pasty, viscous, and contaminated liquid media compatible with stainless steel AISI 316L (1.4435) and AISI 304L...
The PD111 is a pressure transmitter designed to convert vacuum or gauge pressure in an electrical signal of 4-20 mA. This transmitter is made of stainless steel AISI316L, equipped with a silicon me...
The DTS125L is a temperature sensor for measuring the air temperature for outdoor or indoor areas. The housing is made for wall mounting. The protection degree of IP65 enables to use the sensor in ...
The NPT4 is a universal temperature transmitter housed in a 6-mm slim enclosure for DIN rail mounting. This device is intended to convert any input signal from a TC or RTD (2-, 3-, 4-wire) sensor i...
The NPT3 transmitters are designed to be mounted on a measuring insert in a Form B DIN connection head. The device converts the sensor signal from a thermocouple or RTD to a 4-20 mA standard signal...
The one channel temperature controller TRM500 is a universally applied and easily used built-in device. The device is provided with a universal input for a wide range of resistance thermometers and...
TRM212 is a stand-alone PID controller available in two enclosures: for wall or for panel mounting. A special feature of this process controller is the ability to control analog- or 3-step control ...
TRM202 is a 2-channel process controller available in two enclosures: for wall or for panel mounting. Beside the on-off control, the TRM202 can also implement proportional control. This controller ...
TRM138 is an 8-channel on-off controller designed in a plastic enclosure for panel mounting. This device is intended for measuring, displaying and controlling different physical variables such as t...
RS485 repeater IC5 is used to connect two segments of the RS485 network in purpose to increase the bus length and extend the network by additional devices (up to 32). The repeater provides galvanic...
With the USB-RS485 bidirectional converter IC4, you can create an extra serial port on a notebook or PC and connect a serial device to a vacant USB port. It provides reliable galvanic isolation bet...
IC3 is a bidirectional RS232-to-RS485 converter. With this device, you can connect any RS485 device directly to the serial RS232 COM port of your PC or another device. This converter supports autom...
The BPS210-60.S is a two phase power supply unit with an integrated output-relay fit for the demanding solutions. It offers maximum functionality for applications in complex systems and machines. T...
The MU210 DO series (MU210-401, MU210-402, MU210-403, MU210-410, MU210-412, MU210-501 ) by akYtec offers a range of digital output modules designed to enhance control and communication in diverse ...
The MV210 DI series (MV210-202, MV210-204, MV210-212, MV210-214, MV210-221) and MK210-311, MK210-312 by akYtec stands out as a highly versatile and effective suite of digital input modules, optimiz...
The MV210 AI Series from akYtec represents a collection of input modules, working through Modbus TCP via Ethernet, expertly designed for precision and versatility in industrial automation systems. ...
The MU110 DO Series (MU110-24.8R, MU110-24.8K, MU110-24.16R, MU110-24.16K, MU110-24.32R) by akYtec features a selection of digital output modules, each engineered to enhance decentralized automatio...